KRZR K1 Taking it Apart

From Guides

by th1rt3en

Remove Battery/Backplate.



Remove the four "Torx 5" screws from the back, and pry off the little metal piece circled in green, and unplug that plug.





Pry off the back(its pretty tough, put some muscle into it.)



Unplug the LCD ribbon from the board, and remove the board( its pretty easy.)



Unscrew the Torx 5 Screw on the hinge, holding in the right side hinge cap.



Now flip the phone over, and pry off the outter rim cover(its glued on pretty good.) Try not to scratch it.



Take out the four Torx 5 GOLD screws, keep them in a safe spot.



Pry up on the top with the Ipod tool, and move down the sides, it will eventually pop off.



Unplug the LCD Ribbon and the camera.





The LCD should slip out pretty easy now. Close the flip.

On the left hinge, pop out the cover(like on the RAZR).. then on the right, press in with something small(i used a small flat head), and the hinge should let out.





Be careful with the ribbons, they're sensitive. and set the pieces down.



Vuah Lah! Finished!



Questions? Comments? Get at me!