Slvr L7 Get Multi-Fonts

From Guides

by manasmoto

.................................................. .................................................. .................

• For Multifont to work you need RSA removed Firmwares

• If you are already using RSA removed new MPs then no need to worry about

• If you are using a stock/original MP you need to remove RSA (RSA removal guide)

• With this guide you will be able to get six fonts for English Language

• If u want to add multifont to other languages follow only CG4 making part of LFM's Guide and rest are already prepared here.

.................................................. .................................................. .................

.................................................. .................................................. .................

Multi-Font Guide

.................................................. .................................................. .................

1. Take a backup of CG1,CG3,CG7,CG15 & CG18 or a full backup by F&B (Backup guide)

2. Split the backup using SHX Codec (See instruction No.1)

3. In the folder where you have splitted, you will get .smg files of CG1,CG3,CG7,CG15 & CG18

4. Apply CG1.fpa to CG1.smg by mini patcher (See instruction No.2)

5. Apply CG15.fpa to CG15.smg by mini patcher (See instruction No.2)

6. Compile shx using SBF recalc (See instruction No.3)

7. Now flash the newly compiled shx file to your phone by F&B 3.0.3 or higher (See instruction No.4)

8. Select any one of our Multi Font LPs and again flash it to your phone by F&B 3.0.3 or higher (See instruction No.4)

9. Now you will have six fonts in your phone. See the description of the LP to know about fonts.

10. Upload the dnp.prf file attached in this thraed to your phone (See instruction No.5)

11. If you dont like the fonts of our CG4 Pack and you have your own fonts to add (See instruction No.6)

12. If you dont have any font and you want to save it from a language Pack (See instruction No.7)

13. If you want to add or delete any language from a Language Pack (See instruction No.8)

.................................................. .................................................. .................

Useful Instructions

.................................................. .................................................. .................

.................................................. .................................................. .................

1. How to split?

.................................................. .................................................. .................

• Open the .Shx file (backup file) by SHX Codec.

• Click on Split source SHX file

.................................................. .................................................. .................

2. Know how to apply fpa by mini patcher?

.................................................. .................................................. .................

• to patch the CG1/Cg15

• click on "Open CG" and look for the file that ends with CG1/CG15.smg

• then click on "Select Patch " and choose the corresponding fpa file attached

• then click on "apply patch". and the patch will be automatically done

[IMP: Apply CG15_ACR.fpa for ACR DRM, CG15_DCR.fpa for DCR DRM and CG15_ABR.fpa for ABR DRM

To know which DRM (ACR/DCR/ABR) you have, open the CG15.smg by any HEX editor, search for the text string R4513, then you will be able to know about which DRM is it.]

.................................................. .................................................. .................

3. Know how to compile shx using SBF?

.................................................. .................................................. .................

• Open SBF recalc 1.2

• Click on "Open CG-folder" and click on the folder having all .smg files

• Click on "recalc checksum"

• Click on "create shx" when you see the list of recalculated code groups

.................................................. .................................................. .................

4. Know how to flash?

.................................................. .................................................. .................

• Open F&B 3.0.3 or higher

• Select the correct phone profile in active phone profile

• Go to write data

• Click on "select flash file" and select the newly compliled shx file

• Click on "write data" and wait till the flashing process completes

.................................................. .................................................. .................

5. Uploading dnp.prf file and activating it

.................................................. .................................................. .................

• select the dnp.prf attached

• If you are using Indiana or any other new MPs select Dnp-Indiana

• If you are using Other stock/original MPs select Dnp-Others

• Open p2k tools> file manager> refresh> Uplpoad dnp to a/...

• Do the following seem edit if using stock/original MPs.

• Seem 0032_0001,offset 72, bit 7 (check) (Seem edit guide)

.................................................. .................................................. .................

6. Know how to add fonts in the Language Pack?

.................................................. .................................................. .................

• Open Moto lang Editor 2.2

• Click on file, then click open language pack file (choose file type as .shx) and select one of our Language Packs

• You will now see No, Description and Height in the font tab.

• You will have to change the fonts with font ID/font No. 01,02,06,08,0B & 0C

• I will give you the example of changing font No.01 and you will have to do it for others

• Before proceeding check the box "separate 1 & 2 font

• Now click on font No.01 (default font)

• From file ,Symbol, Font & Strings tab in the top click on Font and then load font

• Select the font you have and similarly do it for all other font Nos( 02,06,08,0B & Oc) with other fonts

• Click on save language pack

• Now compile shx by SBF Recalc as per instruction no.4

.................................................. .................................................. .................

7. How to save fonts from a language pack?

.................................................. .................................................. .................

• Open Moto lang Editor2.2

• Click on file, then click open language pack file (choose file type as .shx) and select a Language Pack

• Go to Font no.01

• From file ,Symbol, Font & Strings tab in the top click on Font and then save font

Note: Do this for all the Font No.

.................................................. .................................................. .................

8. How to add/delete Languages to a language pack?

.................................................. .................................................. .................

• Open Moto lang Editor2.2

• Click on file, then click open language pack file (choose file type as .shx) and select a Language Pack from where you want to save a language

• Go to string tab click on the language you want to save and then click save

• Click on file, then click open language pack file (choose file type as .shx) and select the Language Pack to which you want to add the saved language

• Go to string tab and add or delete the languages you want (dont delete english, croatian, greek,czech,hungarian & turkish Languages)

• Then save the Language Pack

• Comile shx by SBF Recalc as per instruction no.4

• flash it to your phone by F&B

.................................................. .................................................. .................

Downloads

.................................................. .................................................. .................

Mini Patcher, Moto lang Editor, Codec, SBF Recalc, Flash&Backup

.................................................. .................................................. .................

Our Multi-Font Language Packs

.................................................. .................................................. .................

1. Multi-Font Language Pack 1 (Indiana LP/English Multifont)

2. Multi-Font Language Pack 2 (English Multifont)

3. Multi-Font Language Pack 3 (Italian Multifont)

4. Multi-Font Language Pack 4 (Spanish Multifont)

5. Multi-Font Language Pack 5 (Dutch Multifont)

.................................................. .................................................. .................

Other Multi-font guides

.................................................. .................................................. .................

(a) LFM's Guide

(b) Bfielding's/Ben's Guide

.................................................. .................................................. .................

Multi-font fpa files for ACR, ABR & DCR firmwares, the DNPs and some Fonts

.................................................. .................................................. .................

• DNP.prf files

• Fonts

• Workin Acr CG15 Patch

• Multi-Font .fpa patch files

• Multi-Font .fpa UNDO patch files

• Multi- Font CG15 .fpa for DAR